This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ125X160-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10
The AirTAC SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø125mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ125X160-10, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ125 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- StatusDiscontinued → SAIJ125X160-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10
The AirTAC SIJ125X160-10 is a double-acting double-rod ISO 15552 adjustable-stroke cylinder featuring a 125 mm bore and 160 mm nominal stroke. An external stop screw lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 150-160 mm extension. This SIJ model is discontinued; the direct replacement is the SAIJ125X160-10, matching the interface, force, and mounting.
The SAIJ upgrade incorporates a two Y-shaped one-way piston seal for low start-up pressure and extended life. Note this non-magnetic SKU cannot accept a switch. The stop screw sets end position only; it is not a lock, so use an external rod lock or SAIL/BSAI variant for load holding on air loss.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10 Technical Specifications
| Model | Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ125X160-10 |
| Bore size | Ø125 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ125X160-10 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
The SAIJ125X160-10 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 125 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10 Is Used
Press Fit Tuning
Field-trim the 10 mm extend window to dial in exact bearing seating depth without machining new hard stops.
Divertor Positioning
Adjust the extend end position on-site to fine-tune product push-off distance across varying package widths.
Pallet Stop Calibration
Shorten the extend stroke by up to 10 mm to calibrate pallet halt points precisely at the staging lane.
Replacing the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10 with the SAIJ125X160-10
To replace the discontinued SIJ125X160-10, order the direct replacement SAIJ125X160-10, keeping the 160 mm stroke and 10 mm adjust window. Choose the 10 mm adjust window when you need precise 150-160 mm extend tuning. Mounting interfaces include FA, LB, and TC. As this SKU lacks the -S magnet, it cannot take a sensor; add -S for legacy CS1-B/DS1-B switch compatibility. For strokes of 300 mm or longer, verify side-load limits to prevent rod bearing wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ125X160-10
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-10 FAQ
Yes, the SIJ125X160-10 is discontinued. The direct replacement is the SAIJ125X160-10, offering the same ISO 15552 interface, 125 mm bore, 160 mm stroke, 10 mm adjust window, and G1/2 port.
The external stop screw window is 10 mm, allowing you to trim the extend stroke from 160 mm down to 150 mm.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ125X160-10
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ125X160-10 replacement — usually within 7-8 hours.