This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ125X160-100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S
The AirTAC SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø125mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ125X160-100S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ125 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- StatusDiscontinued → SAIJ125X160-100S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S
The AirTAC SIJ125X160-100S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. Its external stop screw lets you trim the extend stroke by up to 100 mm on-site, giving a usable 60-160 mm extension out of the 160 mm nominal maximum. The direct replacement is the SAIJ125X160-100S, matching the interface, force, and mounting.
The SAIJ upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. The -S suffix provides a piston magnet for legacy CS1-B/DS1-B switches. Remember the stop screw sets end position; it is not a load lock, so use SAIL or BSAI for held loads.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S Technical Specifications
| Model | Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ125X160-100S |
| Bore size | Ø125 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ125X160-100S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
The SAIJ125X160-100S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 125 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S Is Used
Press Fit Tuning
Allows operators to fine-tune the extend stroke on-site for pressing bearings, accommodating material thickness variations without swapping cylinders.
Variable Length Diverter
Adjusts the extend stop position dynamically on a packaging line to divert different box sizes accurately using the 100 mm trim window.
Adjustable End Stops
Sets precise mechanical end positions for heavy pallet lifting or locating fixtures where a fixed stroke cylinder lacks the required flexibility.
Replacing the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S with the SAIJ125X160-100S
To replace the discontinued SIJ125X160-100S, order the direct replacement SAIJ125X160-100S, reusing your existing FA, LB, or TC mounts. Choose the 100 mm adjust window if you need to trim the 160 mm nominal extend down to a 60 mm minimum on-site. The -S magnet enables position sensing. For strokes >=300 mm, verify the side-load capacity to prevent rod binding. The external stop sets end position but does not lock; for load holding on air loss, specify an external rod lock or the SAIL/BSAI variant.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ125X160-100S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X160-100S FAQ
Yes, the SIJ125X160-100S is discontinued. The direct replacement is the SAIJ125X160-100S, offering the same ISO 15552 interface, 125 mm bore, 160 mm stroke, 100 mm adjust window, and G1/2 port.
The external stop screw allows trimming the extend stroke by up to 100 mm on-site, yielding a usable 60-160 mm stroke. The stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ125X160-100S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ125X160-100S replacement — usually within 7-8 hours.