This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ125X175-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S
The AirTAC SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø125mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ125X175-75S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ125 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- StatusDiscontinued → SAIJ125X175-75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S
The AirTAC SIJ125X175-75S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 75mm on-site, yielding a usable 100-175mm extend window from the 175mm nominal maximum. The direct replacement is the SAIJ125X175-75S, sharing the same interface, force, and mounting.
The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. The -S suffix denotes a piston magnet for legacy CS1-B/DS1-B switches. Remember the stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S Technical Specifications
| Model | Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ125X175-75S |
| Bore size | Ø125 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ125X175-75S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
The SAIJ125X175-75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S Is Used
Press Fit Tuning
Allows operators to dial in the exact 100-175mm extend position on-site for pressing bearings without machining custom spacers.
Variable Length Diverter
Adjusts the extend stop dynamically to divert different package sizes on a packaging line within the 75mm trim window.
Adjustable End Stop
Provides a field-tunable hard stop for pallet positioning tasks where the exact end-of-stroke contact point varies by fixture.
Replacing the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S with the SAIJ125X175-75S
To replace the discontinued SIJ125X175-75S, order the direct replacement SAIJ125X175-75S, retaining the same ISO 15552 mounting interface and G1/2 port. Select the 75mm adjust window if your application requires field-tuning the extend stroke down to 100mm; otherwise, a fixed SAI cylinder avoids external stop complexity. Mounting choices include FA, LB, and TC. The -S suffix ensures a piston magnet for position sensing. For stroke lengths of 300mm or more, verify guide shafts to handle side-load moments.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ125X175-75S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-75S FAQ
Yes, the SIJ125X175-75S is discontinued. The direct replacement is the SAIJ125X175-75S, offering the same 125mm bore, 175mm stroke, 75mm adjust window, G1/2 port, and ISO 15552 mounting interface.
The external stop screw allows trimming the extend stroke by up to 75mm on-site (usable 100-175mm). Note the stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ125X175-75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ125X175-75S replacement — usually within 7-8 hours.