This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ32X200-30, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30
The AirTAC SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ32X200-30, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAIJ32X200-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30
The AirTAC SIJ32X200-30 is a double-acting double-rod ISO 15552 adjustable-stroke cylinder, now discontinued and superseded by the direct replacement SAIJ32X200-30. It features a 32mm bore, G1/8 port, and an external stop screw that lets you trim the extend stroke by up to 30mm on-site, yielding a usable 170-200mm extend range from the 200mm nominal maximum. The stop screw sets the end position; it is not a load lock, and a plain cylinder drifts on air loss.
The SAIJ replacement reuses the exact ISO 15552 mounting interface and adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. This SKU lacks a magnet (-S), so it cannot accept a magnetic switch.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30 Technical Specifications
| Model | Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ32X200-30 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ32X200-30 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAIJ32X200-30 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30 Is Used
Component Seating Presses
Dial in the exact extend stroke within the 30mm window to seat delicate parts precisely without re-engineering the fixed ISO 15552 mounting setup.
Adjustable Transfer Diverters
Trim the extend stroke by up to 30mm on-site to alter the diverting distance on a conveyor line, accommodating varying product sizes on the fly.
Replacing the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30 with the SAIJ32X200-30
Replace the discontinued SIJ32X200-30 directly with the SAIJ32X200-30, matching the 32mm bore, 200mm nominal stroke, 30mm adjust window, and G1/8 port. Choose the 30mm adjust window if your extend stroke needs on-site tuning between 170-200mm; the external stop sets end position but is not a lock. Mounting options include Basic, FA, LB, and TC brackets. Because this SKU has no -S magnet, it cannot take legacy CS1-B/DS1-B sensors. For stroke lengths of 300mm or more, verify your side-load limits to prevent rod distortion.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ32X200-30
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-30 FAQ
Yes, the SIJ32X200-30 is discontinued. The direct replacement is the SAIJ32X200-30, which shares the same ISO 15552 interface, 32mm bore, 200mm stroke, 30mm adjust window, G1/8 port, and mounting options.
The external stop screw provides a 30mm adjust window, allowing the extend stroke to be shortened from the 200mm nominal maximum down to 170mm on-site.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ32X200-30
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ32X200-30 replacement — usually within 7-8 hours.