This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ32X60-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S
The AirTAC SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ32X60-10S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAIJ32X60-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S
The AirTAC SIJ32X60-10S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 32 mm bore and 60 mm maximum stroke. An external stop screw lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 50-60 mm extension. It features a 12 mm rod, M10x1.25 thread, 27 mm adjustable cushions, G1/8 port, and a built-in magnet (-S) for legacy CS1-B/DS1-B switches. The stop sets the end position but is not a load lock.
The direct replacement is the SAIJ32X60-10S, retaining the same interface, force, and mounting. The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. No load holding without live air; use SAIL or BSAI for locked loads.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S Technical Specifications
| Model | Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ32X60-10S |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ32X60-10S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAIJ32X60-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S Is Used
Small Parts Ejection
Trimming the extend stroke by up to 10 mm on-site allows precise ejection of small parts without relocating the G1/8 ported cylinder mount.
Light Duty Clamping
Adjustable end positioning provides accurate clamping of delicate workpieces where a fixed 60 mm stroke would apply too much travel.
Replacing the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S with the SAIJ32X60-10S
To replace the discontinued SIJ32X60-10S, order the direct replacement SAIJ32X60-10S. The 10 mm adjust window is ideal if your end position needs minor on-site tuning. Reuse existing FA, LB, or TC ISO 15552 mounts. The -S suffix provides a piston magnet for CS1-B/DS1-B sensors. For stroke lengths over 300 mm, verify side-load limits to prevent rod wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ32X60-10S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X60-10S FAQ
Yes, the SIJ32X60-10S is discontinued. The direct replacement is the SAIJ32X60-10S, which shares the same ISO 15552 interface, 32 mm bore, 60 mm stroke, and G1/8 port. The SAIJ uses an upgraded piston seal for longer life.
The external stop screw window is 10 mm, allowing you to shorten the extend stroke from 60 mm down to 50 mm.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ32X60-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ32X60-10S replacement — usually within 7-8 hours.