This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ32X75-75, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75
The AirTAC SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ32X75-75, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAIJ32X75-75
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75
The AirTAC SIJ32X75-75 is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 75mm on-site, dropping the 75mm nominal stroke down to a 0mm minimum. The stop sets the end position but is not a load lock.
The direct replacement is the SAIJ32X75-75, matching the interface, force, and 27mm adjustable cushions. The SAIJ upgrade uses a two Y-shaped one-way piston seal for low start-up pressure. This non-magnet SKU cannot take a switch.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75 Technical Specifications
| Model | Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ32X75-75 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ32X75-75 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAIJ32X75-75 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75 Is Used
Variable Depth Forming
Adjusts the extend stroke on-site for pressing parts to different depths without swapping the entire cylinder body.
Variable Length Diverter
Tunes the pusher extension length to accommodate changing package widths on a packaging line.
Prototype Stroke Setup
Allows engineers to dial in the exact extend end position during fixture testing before finalizing hard stops.
Replacing the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75 with the SAIJ32X75-75
Replace the SIJ32X75-75 directly with the SAIJ32X75-75, retaining your FA, LB, or TC ISO 15552 mounts. Choose the 75mm adjust window when full extend length varies per job. Because this SKU lacks a -S magnet, it cannot support legacy CS1-B/DS1-B sensors. For stroke lengths over 300mm, verify side-load guide tolerance. The stop screw sets end position only; for load holding on air loss, use an external rod lock or SAIL/BSAI variant.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ32X75-75
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75 FAQ
Yes, the SIJ32X75-75 is discontinued.
The external stop screw window is 75mm, letting you shorten the 75mm nominal extend stroke down to 0mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ32X75-75
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ32X75-75 replacement — usually within 7-8 hours.