Airtac X-ASL Adapter (L-Type) Restricted Port X-ASL6M8
AirTAC X-ASL6M8 Limit-Entry L-Type Fitting Specifications
- Model: X-ASL6M8-(L)
- Type: Limit-entry L-shaped pneumatic connector
- Thread specification: M8×1.0 (external) / M5×0.8 (internal)
- Material: Nickel-plated brass body
- Seal material: NBR (Nitrile) O-rings
- Pressure range: 0.05–1.0 MPa
- Temperature range: -20℃ to 80℃
- Surface treatment: Electrolytic polishing
- Weight: ~22g
- Dimensions: 28mm(L) × 25mm(W) × 34mm(H)
- Thread engagement depth: 7.5mm (M8 side)
- Torque limit: 3.5 N·m max
- Flow capacity: 120 NL/min (at 0.5 MPa)
90° angled restrictor fitting with built-in particle guard, featuring tapered thread design for leak-proof connections. The M8→M5 stepped threading enables secure transition between different pneumatic component sizes. Anti-vibration grooves prevent loosening in high-frequency applications.
- Compact pneumatic circuit branching in robotics
- Sensor mounting interfaces on automated assembly lines
- Space-constrained pneumatic tool connections
- Medical device gas line management systems
- Food processing equipment with hygiene requirements
Installation protocol:
Apply 1.5-2 wraps of PTFE tape on male threads. Hand-tighten first,
then torque to 2.8-3.2 N·m using crowfoot wrench.
Do not overtighten – overtightening may deform NBR seals.
Compatibility note:
Use only with filtered air (40μm+ filtration).
Not recommended for vacuum applications exceeding -90kPa.
| Property | Property Value |
|---|---|
| sku | X-ASL6M8 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.