Airtac X-ASPL Connector - Elbow Type Quick Plug X-ASPL602
AirTAC X-ASPL602 Elbow-Type Quick-Connect Fitting Specifications
- Model: X-ASPL602
- Type: Elbow push-to-connect fitting (single-touch type)
- Tube OD compatibility: 6mm (1/4")
- Thread specification: R1/8 (BSPP) female thread
- Material: Brass (nickel-plated) + PPS resin
- Seal material: NBR rubber
- Operating pressure: 0-1.0 MPa
- Temperature range: -5℃ to 60℃
- Burst pressure: ≥3.0 MPa
- Flow rate: 200 NL/min (at 0.5 MPa)
- Elbow angle: 90° fixed orientation
- Weight: ~22g
- Dimensions: 50mm(L) × 25mm(W) × 38mm(H) (body only)
- IP rating: IP40 (dust protected)
- Vibration resistance: 10-55Hz, 1.5mm amplitude
High-flow elbow connector featuring one-touch tube insertion with positive locking mechanism. Nickel-plated brass body ensures corrosion resistance in humid environments. The 45° swivel capability post-installation allows flexible tubing routing. Includes built-in tube retention clip for accidental disconnection prevention.
- Pneumatic tool air supply lines
- Automated assembly line cylinder connections
- Packaging machine air circuit distribution
- Medical equipment gas line junctions
- Semiconductor fab pneumatic controls
- Robotic end-effector tooling interfaces
Installation protocol:
Cut tube ends square (max 0.1mm burr) before insertion.
For maintenance, depress the collet fully using the integrated release collar.
Avoid axial rotation during tube removal.
Recommended torque: 12-15N·m during threaded port installation.
Not compatible with ester/oil-based lubricants.
Maximum allowable tube ovality: 5% of nominal OD.
Requires periodic inspection (quarterly) for seal wear under high-cycle applications.
| Property | Property Value |
|---|---|
| sku | X-ASPL602 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.