
The AirTAC 4V130P-06B Solenoid Valve, 5/3-way, pressure center, PT1/8, DC24V, terminal entry (4V130P06B) is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with PT1/8 ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V130P-06B is a 5/3-way double-solenoid valve with a pressure-center spool, designed to direct compressed air to double-acting cylinders and actuators. In its center position, both cylinder ports are simultaneously pressurized, which can be useful for holding a rod in a specific force-balanced state or for opposing a constant external load without fully locking the piston. This model operates on a DC24V coil drawing just 2.8 W and features a standard terminal-box electrical entry with 1/8-inch PT tapered threads.
Part of the compact 4V100 series, this valve body weighs 200 g and delivers an effective area of 8.6 mm2 (Cv 0.51, catalog figure for the 4V130C-06), suiting it to small-bore cylinders roughly in the Ø16-32 mm range. The sliding-spool design responds in 0.05 seconds or less and requires no lubrication, while the IP65-rated enclosure and aluminum alloy body ensure reliable service in benchtop automation and light industrial tasks.
| Model | AirTAC 4V130P-06B Solenoid Valve, 5/3-way, pressure center, PT1/8, DC24V, terminal entry (4V130P06B) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
A pressure-center spool applies balanced force to both sides of a small clamp cylinder, letting it hold a delicate workpiece with a controlled, cushioned grip during a bonding or inspection cycle.
In a lab automation setup, the 4V130P-06B pressurizes a miniature double-acting actuator to resist a constant spring load, maintaining a precise home position without continuous signal changes.
This valve controls a small press cylinder where the rod must extend with a specific preload force. The pressure-center state keeps the tooling engaged with a steady push before the next sequence step.
Choose the 4V130P-06B when your application needs a 5/3 pressure-center function in a miniature body. This center condition pressurizes both A and B ports, which can help resist a constant tool weight or preload a gripper in a specific way—just remember it does not lock the cylinder against external forces like a mechanical brake would. If your cylinder is larger than 32 mm bore or you need a higher flow capacity, step up to the 4V200 series with its Cv of 1.0.
When replacing an existing valve, match all five points: confirm the 4V100 body size, the 5/3 pressure-center function, the 1/8-inch port with PT thread, the DC24V coil voltage, and the terminal-box electrical entry. This valve can be mounted individually or ganged on a manifold base for multi-cylinder circuits, making it a flexible choice for compact pneumatic panels.
Quick checklist
With an effective area of 8.6 mm2 (Cv 0.51, catalog figure for the 4V130C-06), this 5/3 valve is typically a good match for double-acting cylinders with a bore between approximately 16 and 32 mm. For larger cylinders or faster cycle times, consider moving to a 4V200-series valve with a higher Cv.
When both solenoids are de-energized, the spool moves to the center position where both cylinder ports (A and B) are connected to supply pressure. This pressurizes both sides of the piston simultaneously, creating a balanced force condition. It is not a safety lock; if you need to hold a suspended load securely, add a pilot-operated check valve at the cylinder ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.