
The AirTAC 4V230C-06C Solenoid Valve, 5/3-way, closed center, PT1/8, AC110V, terminal entry (4V230C06C) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230C-06C is a 5/3-way double-solenoid valve built on the popular 4V200 body. When both coils are de-energised, the closed center blocks all ports, holding a double-acting cylinder at its mid-stroke position. This makes it ideal for applications where the load must pause, powered by a 110 V AC coil drawing 4.5 VA.
With a 1/8-inch PT port and an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08), it suits ~32–50 mm bore cylinders running at moderate speed. The spool shifts in 0.05 seconds or less, and the IP65-rated terminal box keeps wiring tidy in washdown or dusty environments. At 360 g, it mounts easily on a manifold base for multi-station control.
Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.
| Model | AirTAC 4V230C-06C Solenoid Valve, 5/3-way, closed center, PT1/8, AC110V, terminal entry (4V230C06C) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
A closed-center 5/3 valve stops a clamp cylinder partway through its stroke and holds pressure on the workpiece for gluing or welding.
On a packaging line, the 4V230C-06C pauses a pusher cylinder mid-travel to allow a sensor check, then continues the stroke—all without the load sagging.
In a multi-step assembly fixture, this valve holds a press cylinder at an intermediate position while a second operation completes, ensuring consistent part alignment.
Choose the 4V230C-06C when your circuit needs a cylinder to stop and hold position on loss of signal—the closed center blocks air from escaping. If your cylinder is smaller than 32 mm bore, the 4V100 series (Cv 0.6) may offer a more economical fit; for bores above 50 mm or faster cycle times, step up to the 4V300 (Cv 1.65).
This AC110V terminal-box model replaces any 5/3 closed-center valve matching the 4V200 body, 1/8-inch PT port, and 110 V AC coil. When ordering a replacement, confirm all five points: body size (4V200), function (30C closed center), port size and thread (1/8-inch PT), coil voltage (AC110V), and electrical entry (terminal box).
Quick checklist
With an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08), it is well matched to double-acting cylinders in the ~32–50 mm bore range. For a 32 mm bore at 0.5 MPa, expect a comfortable cycle rate; larger bores will run slower. If you need faster actuation on a 63 mm cylinder, consider the 4V300 series (Cv 1.65).
This is a 5/3 closed-center valve. When both solenoids are de-energised, the spool springs to the center position where all ports (P, A, B, EA, EB) are blocked. The cylinder stops and holds its current position, though for suspended loads a pilot-operated check valve is still recommended as a safety backup.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.