
The AirTAC 4V230C-06EI Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, grommet entry (4V230C06EI) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230C-06EI is a 5/3-way double-solenoid pneumatic directional valve that precisely controls double-acting cylinders with a closed-center spool configuration. When both solenoids are de-energized, the spool blocks all ports, locking air in both cylinder chambers to hold the actuator at its mid-stroke position—ideal for applications requiring a controlled pause.
This model is pre-wired with an AC24V (5.0 VA) coil and a 0.5 m flying-lead grommet entry, simplifying electrical hookup on DIN-rail installations. It features 1/8-inch PT ports, an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08), and a maximum cycling speed of 3 cycles per second. With a response time of 0.05 seconds or less and an IP65-rated enclosure, it suits mid-bore cylinders around Ø32–50 mm in space-constrained automation cells.
Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.
| Model | AirTAC 4V230C-06EI Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, grommet entry (4V230C06EI) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Holds a double-acting cylinder at a precise intermediate point for glue dispensing or inspection, using the closed-center function to lock both sides without continuous air consumption.
Stops a vertically mounted cylinder mid-travel on a packaging line. The AC24V grommet wiring integrates easily into conveyor control panels.
Closes a clamp, holds pressure during a machining cycle, then opens. The 5/3 closed center maintains clamping force at the dwell point without energizing a solenoid, reducing coil heat.
Choose the 4V230C-06EI when your application demands a cylinder to stop and hold position mid-stroke with no air consumption at rest. The closed-center spool is the default for vertical or load-sensitive stops, but remember that spool leakage means it is not a safety holding device; add a pilot-operated check valve for suspended loads. This 4V200 body size hits a sweet spot for Ø32–50 mm cylinders—step down to a 4V100 (Cv 0.6) for smaller Ø20–25 mm actuators, or up to a 4V300 (Cv 1.65) if you need faster fill on a Ø63 mm bore.
For replacement, match five points: the 4V200 body, the 5/3 closed-center function (30C), the 1/8-inch port (06), the AC24V coil voltage (E), and the grommet electrical entry (I). The PT thread matches standard tapered ports; if your manifold uses BSPP parallel threads, select the G-thread variant instead.
Quick checklist
In the de-energized state, the spool blocks all ports (P, A, B, EA, EB). Air is trapped in both ends of the cylinder, holding the piston in its last commanded position. This is ideal for mid-stroke stops but should not be used as a safety lock without an external mechanical brake or check valve, as spool leakage can allow slow drift over time.
No, the 4V230C-06EI is fitted with an AC24V (E) coil rated at 5.0 VA. It requires a 24-volt AC transformer. For a DC24V version with the same 5/3 closed-center function and 1/8-inch port, order model 4V230C-06BI. Using the wrong voltage will burn the coil immediately.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.