
The AirTAC 4V230P-08E Solenoid Valve, 5/3-way, pressure center, PT1/4, AC24V, terminal entry (4V230P08E) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230P-08E is a 5/3-way double-solenoid pneumatic directional valve that directs compressed air to double-acting cylinders and actuators with a distinct pressure-center behavior. When both solenoids are de-energized, the spool moves to its center position and supplies pressure to both cylinder ports (A and B) simultaneously, creating a balanced force that can be used for specific clamping or holding applications where equal pressure is needed on both sides of the piston.
Built on the rugged 4V200 aluminum-alloy body with 1/4" PT (Rc) ports, this valve provides a 13.6 mm² effective area (Cv 0.8, catalog figure for the 4V230C-08) and suits cylinders in the ~Ø32-50 mm range. The AC24V coil draws 5.0 VA, and the spool responds in 0.05 seconds or less. Its IP65-rated enclosure and dual non-locking manual overrides make it a reliable choice for industrial assembly fixtures where a pressure-center function is required.
| Model | AirTAC 4V230P-08E Solenoid Valve, 5/3-way, pressure center, PT1/4, AC24V, terminal entry (4V230P08E) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center function applies equal pressure to both sides of a double-acting cylinder, making it ideal for clamping fixtures that require a balanced, non-crushing hold on delicate parts during assembly or machining.
In laboratory test rigs, the 4V230P-08E can center a cylinder with pressure on both ports, creating a pre-loaded neutral position that eliminates mechanical backlash before a test sequence begins.
By keeping both cylinder ports slightly pressurized at center, this valve helps prevent the ingress of dust or moisture into the cylinder and tubing when the machine is idle, extending seal life in dirty environments.
Choose the 4V230P-08E when your application needs both cylinder ports pressurized at rest, rather than blocked or exhausted. This center condition is useful for opposing-force setups or preventing contamination ingress by maintaining a positive pressure. If you need the cylinder to hold position rigidly, the closed-center 4V230C is a better match; if you need the cylinder to float freely, select the exhaust-center 4V230E.
For smaller actuators below Ø25 mm, the 4V100 series (Cv 0.6) offers a more compact footprint, while larger Ø63-100 mm cylinders or high-speed cycles benefit from stepping up to the 4V300 (Cv 1.65). When replacing an existing valve, match all five points: 4V200 body size, 5/3 pressure-center function, 1/4" PT port, AC24V coil voltage, and terminal-box electrical entry to ensure a direct fit.
Quick checklist
In the de-energized center position, the spool connects the inlet pressure to both cylinder ports (A and B) while blocking the exhaust ports. This pressurizes both sides of a double-acting cylinder piston simultaneously, creating a balanced force. It differs from closed center (all ports blocked) and exhaust center (A and B vented to atmosphere).
Mechanically and pneumatically, the valve body is identical, but the electrical system must match. The 4V230P-08E uses an AC24V (5.0 VA) coil and requires a 24V AC power supply. If your control system outputs DC24V, you must use the 4V230P-08B (DC24V, 3.0 W) instead. Never connect an AC coil to a DC supply or vice versa, as it will burn out the coil immediately.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.