This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X175B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X175B
The AirTAC ACP Compact Cylinder ACP100X175B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X175B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X175B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X175B
The ACP100X175B is a double acting compact cylinder in the DIN-standard ACP series, with a 100 mm bore and a 175 mm stroke on a 25 mm hard-chrome S45C rod. Air drives the piston both ways, and a fixed TPU bumper sits at each end of the hard-anodized aluminium body. At 0.5 MPa it pushes with 3927 N and pulls with 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The male rod thread (B code) and 1/4" PT ports suit heavy clamping and press circuits. Note that this model is discontinued: the current-production direct is ACE100X175, so confirm ISO 21287 mounting dimensions before swapping.
Practically, plan on roughly 2356 N (about 240 kgf) of real work at 0.5 MPa rather than the full rating, which leaves margin for friction and pressure drop. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, a real advantage in press frames and gantries. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi). Remember that without air the piston drifts freely - for a held load add a rod lock or pilot check valve.
Airtac ACP Compact Cylinder ACP100X175B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X175B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X175B |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X175B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X175B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X175B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X175B Is Used
Pneumatic press frame
The 3927 N push at 0.5 MPa (5497.8 N at 0.7 MPa) drives staking and forming heads on aluminium extrusion assemblies, with the 175 mm stroke clearing part loading in a tight press body.
Pallet gate actuation
A 25 mm rod and roughly 200 kg vertical-lift capacity with margin suit lifting stopper gates on warehouse conveyor lines, where the short body fits under low guard rails.
Automotive fixture clamp
Clamping steel brackets on an engine machining line: the male rod thread takes an I/Y knuckle, and the compact body saves about 50% of the length of an ISO 15552 profile cylinder inside the fixture.
Replacing the Airtac ACP Compact Cylinder ACP100X175B with the ACE100X175B
At 100 mm bore this is the top of the ACP range: 3927 N push at 0.5 MPa where an 80 mm bore gives 2513.3 N and there is no larger ACP option - step to a larger ACE bore if you need more. Stroke 175 mm sits well inside the 300 mm maximum standard stroke for this bore. The B code gives a male rod thread; order without it for a female M16x1.5 rod end. If you need position sensing, the optional -S magnet code enables CMSE / DMSE switches - this version has no magnet fitted. Mount with FA/FB flange, LB foot or CA/CB clevis brackets on the ISO 21287 face. Since ACP is discontinued, order ACE100X175 as the current direct and verify ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACE100X175B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X175B FAQ
Push is 3927 N and pull 3681.6 N at 0.5 MPa; at 0.7 MPa push is 5497.8 N and pull 5154.2 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. It is double acting with a 100 mm bore, 175 mm stroke, 25 mm rod, 1/4" PT ports, male rod thread (B code), fixed TPU bumpers, speed 30-500 mm/s, operating pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and -20 to +70 C temperature range. The model is discontinued; ACE100X175 is the current replacement.
The hard-anodized aluminium body follows the short ISO 21287-class format, saving about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press frames and gantries. The fixed TPU pads at both ends only soften end-of-travel contact - they do not slow the mid-stroke or hold a load, so add a rod lock or pilot check valve if the load must stay put when air is lost. FA/FB flange, LB foot and CA/CB clevis brackets bolt to the standard face, and the optional -S magnet code allows CMSE / DMSE switches on the body.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X175B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X175B replacement — usually within 7-8 hours.