This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X200, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X200
The AirTAC ACP Compact Cylinder ACP100X200 is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X200 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X200
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X200
The ACP100X200 is a double acting compact cylinder in the discontinued AirTAC ACP DIN-standard series, with a 100 mm bore, 200 mm stroke and a 25 mm hard-chrome S45C rod on a hard-anodized aluminium body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it was chosen for tight presses and gantries.
Air supply is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and a fixed TPU bumper at each end. This model is discontinued; the current-production direct is ACE100X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP100X200 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X200 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X200 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X200 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X200 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X200
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X200 Is Used
Baling and compacting station
A scrap or packaging baler platen driven by 3927 N at 0.5 MPa over a 200 mm stroke, with the short body fitting inside a guarded frame.
Press-fit of bearing housings
A 100 mm bore gives about 240 kg of usable press force at 0.5 MPa for seating bearings into pump housings on an assembly line.
Replacing the Airtac ACP Compact Cylinder ACP100X200 with the ACE100X200
At 100 mm bore this is the top of the ACP range: if 3927 N at 0.5 MPa is more than your jig needs, the 80 mm bore delivers 2513.3 N, while nothing larger exists in the family. The 200 mm stroke sits inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item. Note that a plain ACP100X200 drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. The rod ends in a female M16x1.5 thread and ports are 1/4" PT. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face. This unit is discontinued; order ACE100X200 as the current replacement and verify ISO 21287 dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE100X200
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X200 FAQ
Push is 3927 N and pull 3681.6 N at 0.5 MPa; at 0.7 MPa push is 5497.8 N and pull 5154.2 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. It is double acting, runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, rod 25 mm with female M16x1.5 thread, 1/4" PT ports, and a fixed TPU bumper at both ends.
Order the ACE100X200, the current-production ISO 21287 successor: swap the P for an E and you get the same 100 mm bore, 200 mm stroke and force class in a matching short body. Because the ACP was built to the DIN standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping. If you also need position sensing, order the -S magnet code so CMSE or DMSE switches can be used.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X200
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X200 replacement — usually within 7-8 hours.