This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X80S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X80S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X80S (ISO 21287 ACE), in the same bore, stroke and force class.
A double acting compact cylinder in the DIN-standard ACP series, the ACP100X80S pairs a 100 mm bore with an 80 mm stroke and delivers 3927 N of push force and 3681.6 N of pull force at 0.5 MPa, rising to 5497.8 N at 0.7 MPa. The hard-anodized aluminium body carries aluminium covers threaded on directly, an S45C hard-chrome piston rod, a fixed TPU bumper at each end and the optional -S magnet that this model already includes, so CMSE or DMSE reed and solid-state switches can be mounted for end-position sensing. Air supply is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed spans 30-500 mm/s.
This model is discontinued; the current-production replacement is the ISO 21287 ACE100X80, which matches the same bore, stroke and force class with a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP follows the DIN-standard footprint.
| Model | Airtac ACP Compact Cylinder ACP100X80S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X80S |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X80S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X80S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
The 3927 N push at 0.5 MPa seats steel mandrels into aluminium gearbox bores on an assembly line, and the 80 mm stroke clears the fixture quickly between cycles.
Mounted with an FB flange, the cylinder locks sand-mould gates shut during pour, where the short body fits inside the tight guard space of the moulding machine.
Sinking into a conveyor bed, the 100 mm bore stops loaded pallets up to about 240 kg of equivalent vertical load, with CMSE switches reporting the stopper position.
At 80 mm of stroke the ACP100X80S suits short-travel, high-force clamping where a full-length cylinder would not fit. If 3927 N at 0.5 MPa is more than the job needs, the ACP80X80S gives 2513 N push in the same stroke; if you need more, no larger ACP bore exists, so step up to a bigger ACE frame. The 80 mm stroke sits well inside the 300 mm maximum standard stroke for bore 100, so no made-to-order length is involved. Mounting choices are FA/FB flange, LB foot, CA/CB clevis, plus CR, SDB pivot and FTC brackets, and the female M16x1.5 rod thread takes standard I/Y knuckles. Remember that a plain cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Order the ACE100X80 as the direct successor and verify the ISO 21287 mounting dimensions.
Replacement checklist
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push rises to 5497.8 N and pull to 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. The model is discontinued - the current direct is the ACE100X80 in the ISO 21287 family, same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, and note the ACP is DIN-standard rather than an ISO 15552 profile cylinder.
The air port is 1/4" (PT thread), the rod end is a female M16x1.5 thread, and the rod is 25 mm diameter. This -S version carries the optional magnet, so CMSE or DMSE reed and solid-state switches mount directly for end-of-stroke signalling. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets. The fixed TPU bumpers only soften the ends of travel - they do not hold a load, so fit a rod lock or pilot check valve where position must be kept.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X80S replacement — usually within 7-8 hours.