Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX10-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10
The AirTAC SAIJ32X10-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 0 to 10 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors.
This adjustable-stroke variant omits the FB, CA, CB, and CR mounting interfaces, offering a focused set of mounts (Basic, FA, LB, TC, FTC, TCM1, TCM2) for streamlined integration. The rear adjuster acts purely as a travel stop to dial in the exact end position during commissioning without adding external physical stops.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10 Is Used
Precision Component Seating
Dial in the exact 0-10 mm travel during machine setup to seat delicate electronic components without crushing them.
Product Changeover Stops
Quickly adjust the rear stopper on the fly when switching between slightly different product sizes on a high-mix assembly line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10 the Right Cylinder?
Choose this 32 mm bore when you need precise 0-10 mm end-position tuning at commissioning or during product changeovers, stepping up from a smaller fixed stroke to gain a variable end-stop. Because the SAIJ32X10-10 features a PT tapered port thread and a SUS420J2 stainless steel rod, it is suited for environments where minor corrosion resistance is beneficial.
The rear screw on this cylinder is a travel stop, not a locking device; it cannot hold a load without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series instead. Since the total stroke is under 300 mm, side-load concerns are minimal, but an external guide is still recommended for optimal piston seal longevity.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10 FAQ
It operates at speeds ranging from 30 to 800 mm/s.
The rear adjuster screw acts as a mechanical stop that allows you to shorten the effective travel from its nominal 10 mm down to 0 mm. It sets the end position but does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.