Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX100-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100
The AirTAC SAIJ32X100-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to shorten the effective travel anywhere within a 0-100 mm window. The barrel is extruded aluminum with sensor grooves on both sides, and this configuration uses a SUS420J2 stainless steel rod for enhanced corrosion resistance.
The rear adjustment screw acts purely as a mechanical stop to fine-tune the end position at commissioning; it does not lock or hold the load without live air pressure. This 32 mm bore unit features a 12 mm rod with an M10x1.25 thread, G1/8 PT ports, and 27 mm air cushions at both ends. It supports a speed range of 30-800 mm/s and uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100 Is Used
Machine Setup Tuning
Dial in the exact 0-100 mm end-stop during initial commissioning to perfect product spacing without adding external physical stops.
Product Size Changeover
Quickly adapt the travel window on a packaging line when switching between different product sizes, minimizing downtime.
Test Fixture Positioning
Use the rear screw to precisely vary the extension distance for repeatable testing parameters in a lab environment.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100 the Right Cylinder?
Choose this 32 mm bore adjustable cylinder when you need to dial in a precise end-stop during machine setup or product changeover without swapping out physical components. Conversely, if you need fixed travel without adjustment, the standard SAI cylinder is a simpler alternative.
Because this is a 100 mm stroke, side-load risks are minimal, but always ensure the 12 mm rod thread is properly aligned. For any load-holding requirements without continuous air pressure, this cylinder's adjuster will not suffice; instead, consider the SAIL (air-released lock) or BSAI (clamp-lock) series. This SKU is dimensionally interchangeable per ISO 15552 and is configured with PT tapered ports and no sensor magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100 FAQ
At the maximum pressure of 1.0 MPa, it provides up to 82 kgf.
The rear adjuster screw lets you mechanically shorten the nominal 100 mm stroke by up to 100 mm, providing a usable travel window of 0 to 100 mm. This stopper only sets the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.