Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX100-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40
The AirTAC SAIJ32X100-40 is a double-acting ISO 15552 profile cylinder with a rear mechanical adjuster, allowing you to dial back the 100 mm nominal stroke by up to 40 mm. This yields a usable travel window of 60 to 100 mm, enabling precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
This SKU features a SUS420J2 stainless steel rod for corrosion resistance and uses PT tapered port threads (G1/8). The rear adjuster acts strictly as a travel stop for deceleration, not a lock, so it will not hold a load without live air pressure. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40 Is Used
Product Changeover
Dial in the exact 60 to 100 mm travel distance during product size transitions without machining new hard stops.
Machine Setup
Fine-tune the retract end-position during commissioning to align packaging or clamping tools perfectly.
Variable End Stops
Use the rear adjuster screw to establish a custom retracted position for delicate assembly operations.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40 the Right Cylinder?
The 40 mm adjustment range is highly beneficial for machine setups requiring frequent product-size changeovers, replacing fixed-stroke SAI cylinders when a variable end-stop is needed. For load-holding without continuous air pressure, select the SAIL or BSAI series instead. To match this exact configuration for an ISO 15552 replacement, specify a 32 mm bore, 100 mm stroke, 40 mm adjustment, PT port thread, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40 FAQ
The rear adjuster screw lets you shorten the 100 mm nominal stroke by up to 40 mm, providing a usable travel window of 60 to 100 mm. The adjuster functions as a mechanical stop to set the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.