Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX100-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50
The AirTAC SAIJ32X100-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a 50-100mm usable travel window, providing massive flexibility for dialing in exact end positions without external stops.
This variant features a SUS420J2 stainless steel rod (code A) for improved corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU omits the magnet, meaning CMSE or DMSE switches cannot be used without modification. Mounting options are restricted to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50 Is Used
Machine Setup Changeover
Quickly dial in the 50-100mm travel window during product family changeovers without swapping out the entire cylinder assembly.
Variable End Stops
Use the rear screw to set precise retract positions for machining operations that require slight positional offsets.
Assembly Line Tuning
Fine-tune the stroke on the plant floor during commissioning to accommodate sensor placement and mechanical tolerances.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50 the Right Cylinder?
If you need less adjustability, a smaller adjustment code saves space, or step up to a 40mm bore for 628N. The 50mm adjustment range is perfect for product changeovers. Remember, the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air holding, use SAIL or BSAI.
When replacing an ISO 15552 cylinder, match the 32mm bore, 100mm nominal stroke, PT G1/8 port, and mounting style. Because the nominal stroke is 100mm, side-loading is minimal, but always ensure the M10x1.25 rod thread is aligned with the load to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50 FAQ
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 100mm down to 50mm. It sets the travel end but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX100-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.