Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX1000-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10
The AirTAC SAIJ32X1000-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. Because this 1000mm stroke exceeds the standard 1000mm maximum, it is a made-to-order unit.
The integrated stopper screw provides a 990-1000mm usable travel window, allowing you to fine-tune the end position during commissioning without adding external stops. It features PT tapered ports and dual-side sensor grooves, though it lacks a magnet for CMSE or DMSE switches.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10 Is Used
Long-Stroke Machine Setup
Dial in the exact 990-1000mm retract position during machine commissioning without swapping out the entire cylinder or bolting on external stopper blocks.
Product Changeover
Quickly adjust the end-stop by up to 10mm on automated lines when processing slightly different package lengths or widths.
Extended Reach Actuators
Utilize a 1000mm made-to-order stroke for far-reaching push operations while maintaining a standard ISO 15552 mounting interface.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10 the Right Cylinder?
Choose this 32mm bore model when you need precise 990-1000mm end-position tuning on a long-stroke machine. Because the stroke is 1000mm, an external guide is strongly recommended to prevent rod sag and manage side loads.
This SAIJ variant uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. The rear adjuster is strictly a travel stop, not a lock; it will not hold the load without live air. For position holding without pressure, select a SAIL or BSAI cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10 FAQ
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from 1000mm down to 990mm. It fine-tunes the retract end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.