Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX1000-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40
The AirTAC SAIJ32X1000-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 960-1000 mm usable travel window by allowing you to trim up to 40 mm from the 1000 mm nominal stroke. This 1000 mm stroke exceeds the standard 1000 mm maximum, making it a non-standard, made-to-order configuration.
The piston rod is built from SUS420J2 stainless steel for enhanced corrosion resistance. Because the rear adjuster acts only as a travel stop for end-position tuning, it will not hold a load without live air pressure. For applications needing position holding, consider an external rod lock or AirTAC SAIL and BSAI series cylinders.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40 Is Used
Long-Stroke End Tuning
Dial in the exact retract position on a 1000 mm stroke during machine commissioning without installing external mechanical stops.
Product Size Changeover
Quickly adapt the travel end-point by up to 40 mm when running different product lengths on the same production line.
Custom Machine Setup
Use the made-to-order 960-1000 mm travel window to perfect equipment timing and positioning where standard strokes fall short.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40 the Right Cylinder?
Choose this adjustable-stroke model when you need precise end-position tuning during commissioning or product changeovers without swapping the cylinder or adding external stops. This SKU features a PT tapered port thread, lacks a magnet for sensors, and uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR mounts.
With a 1000 mm stroke on a 32 mm bore, the 12 mm diameter rod is highly susceptible to side loads. An external guide is strongly recommended to prevent rod bending and premature seal wear. The standard speed range is 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40 FAQ
The maximum operating pressure is 1.0 MPa.
The rear adjusting screw acts as a stopper that lets you shorten the effective stroke by up to 40 mm, creating a 960-1000 mm travel window. It only sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX1000-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.