Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX105-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke105 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100
The AirTAC SAIJ32X105-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. Equipped with an SUS420J2 stainless steel rod, it handles demanding environments while maintaining standard ISO 15552 mounting dimensions.
This model provides a highly versatile 5 to 105 mm usable travel window, trimming the nominal 105 mm stroke by up to 100 mm. The rear screw acts purely as an end-position stop for commissioning fine-tuning and is not a locking device. Without live air pressure, the cylinder cannot hold its load; for dead-air holding, consider the SAIL or BSAI series instead.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100 Is Used
Product Changeovers
Dial in the exact end-stop for different part lengths on the fly, using the 5-105 mm window to avoid swapping tooling.
Machine Setup
Fine-tune the retract position during commissioning without adding external stopper blocks to the fixture.
Variable Diverters
Adjust the stroke on packaging lines to deflect items of varying widths accurately.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100 the Right Cylinder?
The massive 100 mm adjustment range is perfect for machines processing multiple product sizes on a single line, eliminating the need to physically swap cylinders during changeovers.
Because this is a non-magnetic variant, it cannot host CMSE or DMSE sensors. To replace an existing ISO 15552 cylinder, match the 105 mm nominal stroke, 100 mm adjuster code, PT G1/8 port, and SUS420J2 rod material. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100 FAQ
The rear adjuster screw lets you shorten the effective travel from 105 mm down to as little as 5 mm, creating a 5-105 mm usable window. It functions as a physical stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.