Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX105-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke105 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S
The AirTAC SAIJ32X105-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a usable travel window of 5 to 105 mm, allowing precise end-position tuning during commissioning without adding external stops.
This adjustable-stroke model includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the standard sensor grooves on both sides of the extruded aluminum barrel. The mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. The rear adjuster functions strictly as a travel stop for deceleration alongside the standard air cushions, meaning it will not hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S Is Used
End-Stop Calibration
Dial in the exact clamping distance on small fixtures by trimming the travel back anywhere from 5 to 105 mm during machine setup.
Product Changeover
Quickly adapt a packaging line to different carton sizes by rotating the rear adjuster screw instead of swapping out the entire cylinder.
Sensor Mapping
Leverage the integrated magnet and dual sensor grooves to mount CMSE or DMSE switches for precise position feedback across the adjusted range.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S the Right Cylinder?
Choose this 32mm bore when an application requires exact end-position tuning across a 5 to 105 mm window, rather than relying on a fixed-stroke SAI cylinder. Because the nominal stroke is 105 mm, the 12mm rod handles the load well without needing an external guide. For load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead of relying on the rear stopper. To match this ISO 15552 replacement exactly, specify the PT tapered port, SUS420J2 rod material, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S FAQ
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 100 mm. This provides a usable travel window of 5 to 105 mm, allowing you to fine-tune the end position without changing the cylinder.
At the maximum 1.0 MPa pressure, the push force reaches 801N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.