Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX105-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke105 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S
The AirTAC SAIJ32X105-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 95 to 105 mm, allowing you to dial back the nominal 105 mm stroke by up to 10 mm during commissioning.
This variant includes a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance and features a built-in magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. Fluid supply is filtered air, operating reliably between -20 and +70 C.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S Is Used
Machine Changeover Tuning
Dial in the exact end-stop during product size changeovers without physically replacing the cylinder or re-engineering the fixture.
Precision End-Positioning
Fine-tune the retract stroke within the 95-105 mm window to perfect the seating of delicate components without harsh mechanical impacts.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S the Right Cylinder?
Select this 32 mm bore adjustable-stroke model when your assembly requires exact end-position tuning without adding external stops or swapping out the entire cylinder. The rear adjuster screw acts strictly as a travel stop to set deceleration; it does not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series instead.
As a dimensionally interchangeable ISO 15552 cylinder, this unit replaces standard profile cylinders using the exact same mounting interface. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). The PT tapered port threads to a G1/8 connection, and the 12 mm carbon-steel-based rod with an M10x1.25 thread handles moderate side loads effectively within its 105 mm stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S FAQ
The rear adjusting screw acts as an external stopper, allowing you to shorten the effective stroke by up to 10 mm. This creates a usable travel window of 95 to 105 mm, enabling fine-tuning of the end position at commissioning without altering the cylinder mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.