Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX105-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke105 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20
The AirTAC SAIJ32X105-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates an 85-105mm usable travel window from its 105mm nominal stroke.
This adjustable variant allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. It includes variable air cushions at both ends for smooth deceleration, and its extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20 Is Used
Machine Changeover
Dial in the 85-105mm travel window during product size changes without physically swapping the cylinder or adding external mechanical stops.
Sensor-Ready Setup
Utilize the dual-side sensor grooves on the extruded profile barrel to mount switches exactly where the adjusted travel window requires detection.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20 the Right Cylinder?
The rear adjuster acts solely as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series instead.
This model is dimensionally interchangeable per ISO 15552 standards. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. It operates at speeds of 30-800mm/s and, because it lacks the -S magnet suffix, it does not support CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20 FAQ
The 105mm nominal stroke can be adjusted backward by up to 20mm using the rear stopper, creating an 85-105mm adjustable travel window for precise end-position tuning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX105-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.