Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10
The AirTAC SAIJ32X110-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 100-110 mm usable travel window, allowing you to dial back the nominal 110 mm stroke by up to 10 mm during commissioning.
This variant uses a SUS420J2 stainless steel rod (option A) for improved corrosion resistance over standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, and because no magnet is specified, position sensing would require adding a magnet or external switches. The PT tapered port threads match the G1/8 air supply size for this bore.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10 Is Used
End-Position Tuning
Dial in the exact 100-110 mm retract stop during machine commissioning to perfect a pressing or clamping operation.
Product Changeover
Quickly adjust the stroke end by up to 10 mm on a packaging line when switching to a slightly shorter product format.
Variable Stop Setup
Use the rear stopper screw to set a precise travel limit on a small assembly fixture without machining external hard stops.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10 the Right Cylinder?
Choose this 32 mm bore adjustable model when you need precise end-position tuning without swapping cylinders or adding external stops. If your application requires less force, dropping down a bore size is not an option here since 32 mm is the smallest SAIJ class. The rear adjuster acts purely as a mechanical stop to set the travel end; it does not hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 110 mm nominal stroke, 10 mm adjustment range, PT port threads, and the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that SAIJ omits the FB, CA, CB, and CR mounting styles found in some standard lines.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10 FAQ
The rear adjuster screw lets you shorten the effective stroke from 110 mm down to 100 mm. This provides a 10 mm tuning window to fine-tune the end position at commissioning without replacing the cylinder.
If you need higher force, stepping up to a 40 mm bore increases the push force to 628 N at the same pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.