Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100
The AirTAC SAIJ32X110-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This creates a highly versatile 10 to 110 mm usable stroke window, enabling rapid product changeover on the line without swapping the cylinder or bolting on external stops.
This variant is configured with an SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance over standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic solid-state switches, though this specific SKU is supplied without a magnet. Fluid supply connects via PT tapered port threads, and the rear adjuster functions strictly as a travel stop for end-position tuning, not as a lock to hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100 Is Used
Commissioning End-Stop Tuning
Fine-tune the retract end-position during machine setup without physically swapping the cylinder or adding external mechanical stops.
Product Size Changeover
Dial the stroke back from 110 mm down to 10 mm to accommodate varying product lengths on a shared conveyor line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100 the Right Cylinder?
Choose this 32 mm bore when your application requires a nominal 110 mm stroke but demands on-the-fly end-position tuning during commissioning or product size changes. Because the SAIJ32X110-100 features a long 110 mm stroke combined with a 12 mm rod diameter, it is highly susceptible to side-loading; always guide the load externally to prevent rod binding.
For ISO 15552 direct replacement, match the 32 mm bore, 110 mm nominal stroke, 100 mm adjustment range, PT G1/8 port, and the required mounting accessory from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2 (FB, CA, CB, and CR are omitted). If your process requires true fail-safe load holding without live air, select the SAIL (air-released lock) or BSAI (clamp-lock) series instead, as the SAIJ adjuster and air cushions only decelerate the travel end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster acts as an external stop that lets you mechanically shorten the 110 mm nominal stroke by up to 100 mm, creating a 10 to 110 mm usable travel window. It only sets the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.