Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S
The AirTAC SAIJ32X110-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 110 mm travel back by up to 100 mm. This creates a highly versatile 10 to 110 mm usable travel window, ideal for prototyping or machinery requiring frequent product-size changeovers.
This specific configuration includes a SUS420J2 stainless steel rod for enhanced corrosion resistance and a built-in magnet (-S) for use with CMSE reed and DMSE electronic sensors. It uses PT tapered ports sized G1/8 and relies on a 12 mm rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides, and mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S Is Used
Machine Changeover
Dial in the exact retract distance from 10 to 110 mm during product size changes without adding external physical stops to the machine frame.
Commissioning Tuning
Fine-tune the end-of-stroke position during initial setup to perfectly time the pick-and-place motion of a 32 mm bore actuator.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S the Right Cylinder?
If you need substantially more thrust, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. The massive 100 mm adjustment range on this SKU is selected over a fixed-stroke SAI when you need variable end-stops on the fly, allowing you to fine-tune the retract position during commissioning without swapping hardware.
Remember that the rear adjuster acts only as a mechanical travel stop, not a lock; it will not hold a load without live air. For fail-safe load holding, consider the SAIL or BSAI series. To match this exact cylinder as an ISO 15552 replacement, specify: 32 mm bore, 110 mm stroke, 100 mm adjustment, PT G1/8 ports, SUS420J2 rod, and the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S FAQ
The rear adjuster screw lets you shorten the 110 mm nominal stroke by up to 100 mm, providing a usable travel window of 10 to 110 mm. This allows you to set the exact end position at commissioning without replacing the cylinder.
At 0.9 MPa, the push force increases to 724 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.