Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S
The AirTAC SAIJ32X110-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 10mm adjustment range, allowing you to dial in the effective travel window between 100 and 110 mm during commissioning without adding external stops.
This variant includes a SUS420J2 stainless steel rod (option A) for improved corrosion resistance compared to standard carbon steel. The extruded aluminum barrel features sensor grooves on both sides, and because this SKU includes a magnet (-S), it supports direct mounting of AirTAC CMSE reed or DMSE electronic solid-state switches. The rear adjuster functions strictly as a travel stop to fine-tune the end position, not as a lock to hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S Is Used
Machine Changeover
Quickly fine-tune the 100-110 mm travel window during product size changeovers on a packaging line without physically swapping cylinders.
End-Stop Calibration
Dial in the exact retract position to compensate for mechanical wear or sensor drift, ensuring precise actuation every cycle.
Variable Positioning
Set custom end stops for assembly processes that require slight positional adjustments between different workpiece fixtures.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S the Right Cylinder?
The 10 mm adjustment range is ideal for product changeovers where the exact end-of-stroke position varies slightly, saving you from swapping out a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, this cylinder is insufficient—the rear adjuster only sets the travel end—so you should explore an SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 110 mm nominal stroke, PT tapered port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2—omitting FB, CA, CB, and CR). Because the 110 mm stroke is relatively short, the 12 mm rod and M10x1.25 thread handle side loads well, but any stroke over 300 mm would require an external guide to prevent rod binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster acts as an external stopper that lets you shorten the effective stroke from the nominal 110 mm down to 100 mm. It allows fine-tuning of the end position at commissioning, but it does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.