Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20
The AirTAC SAIJ32X110-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 110 mm travel back by up to 20 mm, creating a precise 90-110 mm usable window. This on-board adjustability simplifies commissioning and product changeovers by letting you fine-tune the retract end position without swapping the cylinder or bolting on external stops.
This model is equipped with a PT tapered port thread and operates at speeds from 30-800 mm/s. The rear adjuster acts purely as a travel stop to set the end position and relies on the integrated variable air cushion for deceleration; it is not a locking mechanism and will not hold a load without live air pressure. For position holding, consider the SAIL or BSAI series. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is configured without a magnet for electronic or reed switches.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20 Is Used
Machine Changeover
Dial in the exact 90-110 mm retract position during product size changes on a packaging line without disassembling the actuator assembly.
End-Stop Calibration
Fine-tune the final end position during initial commissioning to absorb mechanical tolerances and achieve precise part placement.
Variable Positioning
Provide a adjustable physical stop for repetitive indexing tasks where the exact stroke length needs slight field adjustment.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20 the Right Cylinder?
If your process demands less force, stepping down is not an option in this profile family without dropping below the ISO 15552 standard, but if you need significantly more thrust, the 40 mm bore offers 628 N. The adjustable rear stopper is ideal for machine setups requiring variable end-stops rather than the fixed travel of a standard SAI cylinder.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 110 mm stroke, 20 mm adjustment range, PT port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). This series omits the FB, CA, CB, and CR mounting styles. Because the stroke is 110 mm, the 12 mm rod and M10x1.25 thread provide adequate support, but always guide external loads to prevent excessive side-load wear on the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20 FAQ
It can reach a maximum of 724 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the nominal 110 mm stroke by up to 20 mm, providing an effective travel window of 90-110 mm. The adjuster acts as a stop for end-position tuning and is not a load-holding lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.