Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S
The AirTAC SAIJ32X110-20-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 90-110mm usable travel window, allowing you to dial back the 110mm nominal stroke by up to 20mm during commissioning.
This variant includes an integrated magnet for position sensing with AirTAC CMSE reed and DMSE electronic sensors. The piston rod is constructed from SUS420J2 stainless steel (code A) for improved corrosion resistance, and the extruded aluminum barrel features sensor grooves on both sides. It uses a PT G1/8 port and offers variable air cushions at both ends to decelerate the load.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S Is Used
Machine Changeover
Quickly fine-tune the 90-110mm stroke end-position during product size changes on a packaging line without swapping out the cylinder.
Sensor-Driven Sorting
Uses the integrated -S magnet with CMSE or DMSE switches to confirm part ejection positions on conveyor systems.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S the Right Cylinder?
If you need higher thrust, stepping up to the 40mm bore increases push force to 628N. The adjustable stroke is ideal for machine setups requiring variable end-stops during product changeovers. For any load-holding requirements without live air pressure, note that the rear adjuster acts only as a travel stop, not a lock; consider an AirTAC SAIL or BSAI cylinder instead.
When replacing an ISO 15552 cylinder, match the 32mm bore, 110mm stroke, 20mm adjustment range, PT G1/8 port, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S FAQ
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective stroke by up to 20mm, creating a 90-110mm usable travel window. It acts as a mechanical stop to fine-tune the end position and is not a lock for holding loads without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.