Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S
The AirTAC SAIJ32X110-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. This built-in stopper eliminates the need to swap cylinders or bolt on external hardware when fine-tuning end positions.
Equipped with a SUS420J2 stainless steel rod (code A) and PT tapered ports, this model includes a magnet (-S) for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel retains standard ISO 15552 mounting dimensions while offering sensor grooves on both sides for flexible switch placement.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S Is Used
End-Position Tuning
Dial in the exact 70-110mm retract distance during machine commissioning without physically changing the cylinder.
Product Changeovers
Quickly adjust the stroke by up to 40mm to accommodate different part sizes on a high-mix assembly line.
Sensor-Driven Positioning
Leverage the built-in magnet with DMSE electronic sensors to confirm the adjusted end-stop position.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S the Right Cylinder?
The adjustable 70-110mm window is ideal for product changeovers on a line. If your setup requires holding a load without live air pressure, note that this rear adjuster acts only as a travel stop, not a lock; you would need an SAIL or BSAI cylinder for that function.
For an exact ISO 15552 replacement match, verify the 32mm bore, 110mm nominal stroke, 40mm adjustment range, PT port thread, and the -S magnet option. Because the stroke is 110mm, side-loading is minimal, but always ensure the M10x1.25 rod thread is aligned with the load to maximize seal life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S FAQ
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from the 110mm nominal length down to as little as 70mm. It is a travel stop, not a lock, so it cannot hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.