Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX110-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S
The AirTAC SAIJ32X110-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 110 mm stroke that can be dialed back by up to 75 mm, yielding a usable travel window of 35-110 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection.
This SKU is configured with an SUS420J2 stainless steel rod (code A) for corrosion resistance and uses PT tapered ports. The integrated magnet (-S) supports AirTAC CMSE reed and DMSE electronic solid-state sensors. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S Is Used
End-Position Tuning
Dial in the exact retract distance during commissioning without physically swapping cylinders or machining external stopper blocks.
Product Changeover
Adjust the 35-110 mm travel window on the fly to accommodate different package sizes or part lengths on a single production line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S the Right Cylinder?
If you need greater thrust, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. The 75 mm adjustment window is ideal for machine changeovers, allowing you to fine-tune the retract position without swapping the cylinder or adding external stops. Unlike the fixed-stroke SAI, this SAIJ variant handles variable product sizes on a single line.
For ISO 15552 replacement matching, verify the 32 mm bore, 110 mm stroke, 75 mm adjustment range, PT G1/8 port, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Note that the rear adjuster is a stop, not a lock; for load-holding without live pressure, consider the SAIL or BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S FAQ
At the maximum 1.0 MPa pressure, it provides up to 82 kgf of thrust.
The rear adjuster screw lets you shorten the 110 mm nominal stroke by up to 75 mm, creating a usable travel window of 35-110 mm. It functions as a mechanical stop for end-position tuning and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX110-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.