Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX115-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke115 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10
The AirTAC SAIJ32X115-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel by up to 10 mm. This yields a precise 105-115 mm usable window, enabling fine end-position tuning at commissioning without swapping the cylinder or adding external stops.
This model features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. It operates at 30-800 mm/s and uses PT tapered port threading (G1/8) for reliable pneumatic connections.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10 Is Used
Precision End-Stop Tuning
Dial in the exact 105-115 mm retract position during machine commissioning to perfectly seat delicate components without physical collisions.
Rapid Product Changeover
Quickly adjust the rear stopper by up to 10 mm to accommodate slightly different part sizes on a high-mix assembly line without changing tooling.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10 the Right Cylinder?
The adjustable stroke is ideal for product changeovers or variable end-stops on a line, whereas a fixed SAI cylinder is better for set-and-forget tasks. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). To replace an ISO 15552 cylinder, match the 32 mm bore, 115 mm stroke, 10 mm adjustment, PT G1/8 port, and no magnet. Since the stroke is under 300 mm, side-load stress on the 12 mm rod is minimal, but external guides are still recommended for heavy lateral loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 115 mm nominal stroke by up to 10 mm, creating a 105-115 mm travel window. It only sets the travel end and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX115-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.