Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX120-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 120mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke120 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S
The AirTAC SAIJ32X120-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 120 mm stroke that can be dialed back by up to 75 mm, creating a 45-120 mm usable travel window for precise end-position tuning at commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for CMSE reed and DMSE electronic switches.
This model uses a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and features PT tapered port threads (G1/8). The rear adjuster acts strictly as a travel stop to fine-tune the retract end without adding external stops; it is not a lock and will not hold a load without live air pressure. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S Is Used
Machine Setup Tuning
Dial in the exact 45-120 mm retract position during initial commissioning without machining external stop blocks or changing the cylinder.
Product Changeover
Quickly adjust the end-stop to accommodate different product sizes on a packaging line, utilizing the 75 mm adjustment range.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S the Right Cylinder?
The 75 mm adjustment range is ideal for machine setups requiring variable end-stops or product-size changeovers without swapping the cylinder. If your application requires holding a load without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster only sets the travel end.
For ISO 15552 replacement matching, verify the 32 mm bore, 120 mm stroke, 75 mm adjustment range, PT port threads, and the -S magnet requirement. The 12 mm rod and M10x1.25 thread handle moderate side loads, but for this 120 mm stroke, ensure proper guiding if the load is heavy or off-center. Operating speed ranges from 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm from the 120 mm nominal length, providing a usable travel window of 45-120 mm. It acts as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX120-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.