Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX130-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10
The AirTAC SAIJ32X130-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 10 mm. This creates a precise 120-130 mm usable stroke window, enabling fine end-position tuning at commissioning without swapping the cylinder or adding external stops.
The piston rod is equipped with an SUS420J2 stainless steel material (option A) for improved corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback, while the variable air cushions at both ends work alongside the rear stopper to decelerate the travel end. Remember that the adjuster acts as a travel stop, not a load-holding lock; the cylinder requires live air to maintain its position.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10 Is Used
Machine Setup Calibration
Dial in the exact 120-130 mm travel window during initial commissioning to perfect end-positioning without machining external stopper blocks.
Product Changeover
Quickly adapt a packaging line for slightly different carton sizes by turning the rear adjuster to shorten the cylinder stroke on the fly.
Variable End Stops
Fine-tune the retract distance in a delicate assembly fixture, using the 10 mm adjustment range to dial in the precise touch point.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10 the Right Cylinder?
Select this 32 mm bore model when your application requires a nominal 130 mm stroke that benefits from minor end-stop calibration during machine setup or product changeover. Conversely, if you need a fixed travel length without the adjustment mechanism, the standard SAI cylinder is the appropriate choice.
When matching this component to an ISO 15552 interchangeable footprint, verify the 32 mm bore, 130 mm stroke, 10 mm adjustment range, PT port thread, and the desired mounting style from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is under 300 mm, side-load stress on the 12 mm rod is minimal, though long unsupported loads should still use an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10 FAQ
The rear adjuster acts as a mechanical stop that lets you shorten the 130 mm nominal stroke by up to 10 mm, creating a 120-130 mm usable travel window. It sets the end position but does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.