Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX130-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100
The AirTAC SAIJ32X130-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the nominal 130 mm stroke by up to 100 mm. This creates a highly versatile 30 to 130 mm usable travel window, enabling precise end-position tuning during commissioning without swapping the cylinder or adding external stops.
This variant is configured with a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and because this configuration omits the -S magnet option, position sensing requires external switch mounting rather than internal CMSE or DMSE sensors. The rear adjuster acts purely as a travel stop for deceleration and positioning; it is not a locking device and will not hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100 Is Used
Product Changeover
Dial in the exact 30 to 130 mm stroke required for different product sizes on a packaging line without physically replacing the actuator.
Commissioning Calibration
Fine-tune the retract end-position during machine setup to avoid crushing delicate components, relying on the rear stopper rather than adding external bumpers.
Variable End-Stops
Provide adjustable physical stops for testing rigs where the effective stroke length needs to be altered between test cycles.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100 the Right Cylinder?
The 12 mm rod and M10x1.25 thread provide a robust interface, though with a 130 mm stroke the side-load risk remains minimal compared to longer strokes. SAIJ shares the standard ISO 15552 mounting footprint but uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. If load-holding without continuous air pressure is required, consider the SAIL or BSAI series instead, as the SAIJ adjuster and air cushions only set travel ends and do not function as a brake.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the nominal 130 mm stroke by up to 100 mm, creating a usable travel window of 30 to 130 mm. This adjuster functions as a travel stop for end-position tuning and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.