Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX130-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S
The AirTAC SAIJ32X130-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The rear stopper allows you to trim the nominal 130mm stroke back by up to 100mm, providing a usable travel window of 30 to 130mm for exact positioning.
This variant features a SUS420J2 stainless steel rod for improved corrosion resistance and includes a magnet for position sensing. It uses PT tapered port threads (G1/8) and works seamlessly with AirTAC CMSE reed and DMSE solid-state switches mounted in the dual-side sensor grooves.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S Is Used
Machine Changeover
Dial in the 30 to 130mm travel window during product size transitions without swapping out the physical cylinder.
Component Seating
Fine-tune the retract end position during assembly to ensure delicate parts are seated accurately every time.
Variable End Stops
Use the 100mm adjustment range to alter the stroke limit on the fly for multi-format production lines.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S the Right Cylinder?
Choose this 32mm bore when your application requires precise end-position tuning at commissioning or during product changeover, avoiding the need to swap cylinders or add external stops.
Because the rear adjuster acts strictly as a travel stop and the air cushions only manage decelereration, this cylinder cannot hold a load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, utilizing a mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S FAQ
It can reach up to 724N at 0.9MPa.
The rear adjuster screw lets you shorten the 130mm nominal stroke by up to 100mm, creating a usable travel window of 30 to 130mm. It functions as a mechanical stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.