Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX130-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S
The AirTAC SAIJ32X130-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 120-130 mm usable travel window, letting you dial back the 130 mm nominal stroke by up to 10 mm during commissioning.
This variant features a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic switches for end-position detection.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S Is Used
End-Stop Calibration
Dial in the exact 120-130 mm retract position during machine setup to align delicate tooling without machining external stoppers.
Product Changeover
Quickly adapt the effective stroke on a packaging line when product sizes change, using the rear screw to trim the travel window.
Light-Load Positioning
Move light 402 N payloads with precision using the 32 mm bore, relying on the dual air cushions to decelerate the load smoothly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S the Right Cylinder?
The 10 mm adjustment range is ideal for fine-tuning the retract end-position without swapping cylinders or adding external stops during product changeovers. Note that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true fail-safe load holding, consider an AirTAC SAIL or BSAI series cylinder.
To match this ISO 15552 interchangeable cylinder, specify the 32 mm bore, 130 mm stroke, 10 mm adjustment, PT tapered port threads, and the -S magnet option. The 12 mm rod and M10x1.25 thread provide adequate support, but always verify your guiding mechanism to prevent excessive side-loading on the piston rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S FAQ
If you increase the pressure to 0.7 MPa, the push force rises to 563 N.
The rear adjuster screw lets you shorten the 130 mm nominal stroke by up to 10 mm, creating a 120-130 mm usable travel window. This allows you to fine-tune the end position at commissioning without external stops, though the adjuster is a stop and not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.