Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX130-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S
The AirTAC SAIJ32X130-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 100-130 mm usable travel window by allowing you to dial back the 130 mm nominal stroke by up to 30 mm. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for CMSE reed and DMSE electronic switches.
This model uses a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and carries PT tapered port threads (G1/8). The rear adjuster acts purely as a mechanical stop to fine-tune end positions during commissioning. It does not lock the load without live air pressure; for true load-holding, consider an external rod lock or SAIL series. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S Is Used
Machine Setup Tuning
Dial in the exact 100-130 mm end-stop during commissioning to perfect positioning without machining external spacers.
Product Changeover
Quickly adjust the retract end-position on packaging lines when switching to different product sizes.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S the Right Cylinder?
Select this 32 mm bore when you need precise end-position tuning without swapping cylinders or adding external stops. Choose the adjustable SAIJ over a fixed SAI when facing frequent product changeovers or varying end-stop requirements. To match this ISO 15552 footprint exactly, specify the 32 mm bore, 130 mm stroke, 30 mm adjustment, PT port, and the -S magnet. For long unsupported strokes of 300 mm or more, always use an external guide to prevent side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you trim the 130 mm nominal stroke back by up to 30 mm, creating a 100-130 mm usable travel window. The adjuster acts as a mechanical stop and does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.