Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX130-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50
The AirTAC SAIJ32X130-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 130 mm stroke back by up to 50 mm. This creates a highly flexible 80-130 mm usable travel window, letting you dial in the exact end position during commissioning without swapping out the cylinder or adding bulky external stops. Built with an extruded aluminum barrel, it is dimensionally interchangeable per ISO 15552 standards.
It features a PT tapered G1/8 port and variable air cushions at both ends to manage deceleration. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50 Is Used
Machine Changeover
Quickly adapt the 80-130 mm travel window during product size transitions on a packaging line without replacing the cylinder.
Commissioning Calibration
Fine-tune the retract end-position to precise tolerances during initial machine setup using the 50 mm rear adjustment screw.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50 the Right Cylinder?
The rear screw mechanism provides a 50 mm adjustment range, offering far more setup flexibility than a fixed-stroke SAI cylinder. To match this ISO 15552 replacement exactly, verify the 130 mm nominal stroke, 50 mm adjuster code, PT G1/8 port, and required mounting accessories.
Because the stroke is 130 mm, side-load risks are moderate, but you should still ensure proper guiding for any unsupported loads. Note that the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR configurations. Since no magnet is specified, this unit does not support CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50 FAQ
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The nominal 130 mm stroke can be shortened by up to 50 mm via a rear adjusting screw, creating an 80-130 mm usable travel window. This stopper fine-tunes the end position but does not lock or hold the load without continuous live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX130-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.