Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX135-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke135 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10
The AirTAC SAIJ32X135-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 10 mm, creating a 125-135 mm usable window for precise end-position tuning.
This model is built with an SUS420J2 stainless steel rod (option A) for improved corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE solid-state switches, though this specific SKU is configured without a magnet.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10 Is Used
Machine Setup Commissioning
Fine-tune the 125-135 mm travel window during initial machine commissioning to perfectly dial in the retract position without machining external spacers.
Product Changeover
Quickly adjust the end-stop by up to 10 mm on a packaging line when processing slightly shorter product lengths, minimizing downtime between runs.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10 the Right Cylinder?
If your setup demands higher force, stepping up to the 40 mm bore yields 628 N. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. To match this as an ISO 15552 replacement, verify the 135 mm stroke, 10 mm adjuster, PT G1/8 ports, and the SUS420J2 rod material. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10 FAQ
The standard operating speed range for this 32 mm bore cylinder is 30-800 mm/s.
A rear adjusting screw acts as a mechanical stopper, allowing you to shorten the nominal 135 mm stroke by up to 10 mm, resulting in a 125-135 mm usable travel window. It only sets the travel end and does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX135-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.