
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX155-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 115 to 155 mm, allowing you to dial in the exact retract end-position during commissioning without swapping hardware.
This model includes a magnet for position sensing and uses a PT G1/8 port. The extruded aluminum barrel incorporates sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The rear stopper sets the travel limit but does not lock the load, meaning live air is required to maintain position against external forces.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-155 mm travel window during format size changes to accommodate varying package lengths without adding external stopper blocks.
Fine-tune the retract stroke during machine commissioning to perfectly seat parts, utilizing the 40 mm adjustment screw to absorb mechanical tolerances.
Actuate sorting gates on a conveyor line where the exact end-stop position needs occasional tweaking to handle different product profiles accurately.
If your setup demands greater thrust, stepping up to the 40 mm bore yields 628 N. The 40 mm adjustment range is perfect for machines running multiple product sizes, as it allows rapid end-stop tuning without adding external stops. For fixed-travel tasks, a standard SAI cylinder is simpler, but the SAIJ variant excels in flexible changeover environments.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 155 mm nominal stroke, PT G1/8 port, and the -S magnet requirement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the rear adjuster acts only as a travel stop and not a brake, use a SAIL or BSAI cylinder if you need true load-holding without continuous air pressure.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm. This creates a usable travel window of 115 to 155 mm, letting you set the precise retract end-position without changing the cylinder or adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.