verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX155-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke155 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$87.90 $95.40Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S

The AirTAC SAIJ32X155-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 105 to 155 mm, allowing you to dial back the 155 mm nominal stroke by up to 50 mm during commissioning.

This variant includes a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides, and the included magnet supports AirTAC CMSE reed and DMSE electronic switches for precise end-of-stroke detection.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S Is Used

tune

Machine Setup and Changeover

Dial in the exact retract distance from 105 to 155 mm during product changeovers, eliminating the need to physically swap out cylinders for different part sizes.

settings_input_component

Variable End-Stop Positioning

Fine-tune the final end position at commissioning using the rear adjuster screw, providing precise travel limits without installing external mechanical stops.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S the Right Cylinder?

The rear adjuster on this SAIJ acts strictly as a travel stop to set deceleration, not as a load lock. For position holding without live air pressure, select a SAIL or BSAI cylinder instead.

Because the 155 mm stroke is under the 300 mm threshold, side-load stress is moderate, though the 12 mm rod and M10x1.25 thread still require linear guidance for heavy radial loads. It uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. To match this ISO 15552 footprint for replacement, specify bore 32, stroke 155, adjust 50, PT ports, and the -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S FAQ

At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.

The rear adjuster screw allows you to shorten the effective travel from the 155 mm nominal stroke down to a minimum of 105 mm. This creates a 50 mm adjustable window for fine-tuning the end position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX155-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.