verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX155-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke155 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$87.90 $95.40Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S

The AirTAC SAIJ32X155-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 155 mm travel by up to 75 mm. This creates a highly flexible 80-155 mm usable travel window, perfect for dialing in exact end positions during commissioning without bolting on external stops.

Because this variant includes a magnet (-S), it integrates seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side barrel grooves. The 12 mm rod and M10x1.25 thread provide a robust interface for standard loads, while the rear adjuster acts purely as a travel stop and deceleration point, not a lock. For applications requiring true load-holding without live air pressure, consider the SAIL or BSAI series.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S Is Used

settings_input_component

Product Changeovers

Dial in the 80-155 mm travel window on the fly to accommodate varying package sizes on a packaging line without swapping out the entire cylinder assembly.

tune

Commissioning Fine-Tuning

Use the rear adjusting screw to set precise retract end positions during initial machine setup, eliminating the need for external mechanical stops.

precision_manufacturing

Testing Fixtures

Vary the stroke length during prototype testing to find the optimal engagement distance for clamping or pressing operations.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S the Right Cylinder?

The adjustable 80-155 mm window is ideal for machine setups requiring frequent product changeovers or variable end-stops, replacing fixed-stroke SAI cylinders when exact travel distances fluctuate. It uses a PT tapered port and accepts the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.

When replicating an ISO 15552 cylinder, match the 32 mm bore, 155 mm nominal stroke, 75 mm adjustment range, PT port, and -S magnet. The 155 mm stroke is well within the 1000 mm maximum standard stroke for this bore, keeping the 30-800 mm/s speed range intact. Although the 12 mm rod handles standard side loads well, always verify guiding profiles on long-stroke assemblies to prevent rod binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S FAQ

The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 75 mm. This gives the 155 mm nominal stroke a usable travel window of 80 to 155 mm, which can be fine-tuned during commissioning without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32AX155-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.