
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Thanks to the -10 adjustment code, you can fine-tune the travel end-position within a 150 to 160 mm usable window without swapping out the unit.
This variant includes a magnet for position sensing and uses a SUS420J2 stainless steel rod (code A) alongside PT tapered port threads. It supports speeds from 30 to 800 mm/s and utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR options. The extruded aluminum barrel includes sensor grooves on both sides for seamless CMSE or DMSE switch installation.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 150-160mm end position during initial commissioning without machining custom spacers.
Quickly adapt the travel end-stop on a packaging line when switching to a slightly shorter product format.
Use the 10mm adjustment range to fine-tune clamping or pressing depth on a light-force assembly fixture.
Choose this 32mm bore when you need precise end-stop calibration during commissioning or product changeovers, avoiding the need for external mechanical stops. If your application requires less force, dropping to a 20mm bore yields 128N at 0.5 MPa; stepping up to a 40mm bore provides 628N.
For a direct ISO 15552 replacement, match the 160mm stroke, 10mm adjustment, PT port, and the -S magnet. Keep in mind the rear adjuster acts strictly as a travel stop and does not hold the load without live air—use a SAIL or BSAI cylinder if true load-holding is required. Since the stroke is under 300mm, side-load concerns are minimal, but always guide heavy loads externally.
Quick checklist
It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the nominal 160mm stroke by up to 10mm, creating a 150-160mm usable travel window. It acts as a physical stop to decelerate the piston, but it is not a lock and will not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.