
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 160 mm travel by up to 30 mm. This creates a precise 130-160 mm usable window, allowing exact end-position tuning at commissioning without swapping out the unit or adding external stops. It features a SUS420J2 stainless steel rod and PT tapered port threads.
The rear adjuster acts purely as a travel stop and relies on the integrated air cushions for end-of-stroke deceleration, meaning it does not hold the load if air pressure drops. For position holding without live air, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 130-160 mm travel during commissioning to perfectly strike a workpiece without machining custom spacers.
Quickly adapt the retract end-position on a packaging line when switching to a different carton length, minimizing downtime.
Use the rear screw to set a precise intermediate stroke limit for delicate pressing or indexing tasks that need fine-tuning.
Choose this adjustable-stroke profile cylinder when your machine setup requires variable end-stops or frequent product-size changeovers, avoiding the need to maintain multiple fixed-stroke SAI cylinders. Conversely, if the 130-160 mm window is excessive, a smaller adjustment code like -10 offers finer tuning.
When matching this for an ISO 15552 replacement, verify the 32 mm bore, 160 mm stroke, 30 mm adjustment, G1/8 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting interface. Note that SAIJ omits the FB, CA, CB, and CR mounts. As a 32 mm bore with a 12 mm rod, it handles moderate side loads, but long unsupported strokes still require an external guide.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the nominal 160 mm down to 130 mm. This creates a 130-160 mm usable window for fine-tuning the retract end-position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.