
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 130 to 160 mm. It features a SUS420J2 stainless steel piston rod and includes a magnet for position sensing.
This adjustable model allows you to fine-tune the retract end position at commissioning without adding external stops. It uses PT tapered port threads and supports AirTAC CMSE reed and DMSE electronic sensors via its dual-side barrel grooves. The mounting interface includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 130 to 160 mm retract position during product size transitions without swapping hardware.
Utilize the integrated magnet with DMSE electronic sensors to confirm the adjusted travel endpoints.
The 30 mm adjustment range is perfect for accommodating product size changes on a line, whereas a fixed-stroke SAI would require physical shimming or swapping the entire cylinder.
For strokes of 160 mm, the 12 mm rod diameter handles moderate side loads, though long unsupported travels still necessitate an external guide. Remember that the rear adjuster acts only as a travel stop, not a lock; the SAIJ32X160-30-S will not hold its load without live air. For fail-safe load holding, consider the SAIL or BSAI series. When matching ISO 15552 replacements, confirm the 160 mm stroke, 30 mm adjustment, PT port, and -S magnet.
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster screw lets you shorten the nominal 160 mm stroke by up to 30 mm, creating a 130 to 160 mm travel window for fine-tuning at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.