
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 120 to 160 mm, allowing you to dial back the nominal 160 mm stroke by up to 40 mm during commissioning.
This variant uses an SUS420J2 stainless steel rod (code A) for improved corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU omits the magnet, so external physical stops or non-magnetic sensing must be used. The rear adjuster acts purely as a travel stop to set end positions without swapping cylinders.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the end-stop by up to 40 mm when switching between product sizes on a packaging line without replacing the cylinder.
Fine-tune the retraction end position to perfectly align a part for an external sensor check before the next machine cycle.
The adjustable stroke is selected over a fixed SAI when you need variable end-stops for product changeovers or fine-tuning at setup. For an exact ISO 15552 replacement, match the 32 mm bore, 160 mm stroke, 40 mm adjustment, PT tapered port, and lack of -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 160 mm stroke is below the 300 mm threshold, external side-load guides are less critical, but the 12 mm rod and M10x1.25 thread still require reasonably aligned loads.
Quick checklist
The rear adjuster screw acts as a mechanical stop, letting you shorten the effective stroke from 160 mm down to 120 mm. It sets the travel end but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.