
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 160 mm nominal travel by up to 40 mm. This creates a highly flexible 120-160 mm usable window, perfect for dialing in exact end positions during commissioning without swapping hardware.
The extruded aluminum barrel includes sensor grooves on both sides, and the included magnet (-S) pairs directly with AirTAC CMSE reed and DMSE solid-state switches for precise position feedback. It uses a PT G1/8 port and offers variable air cushions at both ends to decelerate the moving load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-stop from 120 to 160 mm to accommodate different product sizes on the same line without changing the cylinder.
Dial in the exact end position during setup to avoid adding external physical stops, saving engineering time on new fixtures.
Leverage the dual sensor grooves and CMSE/DMSE compatibility to set precise switching points along the adjustable travel window.
The rear adjuster acts strictly as a mechanical stop for position tuning and deceleration, meaning it will not hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 160 mm stroke, 40 mm adjustment range, PT G1/8 port, and -S magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 160 mm stroke is under 300 mm, side-load stress is minimal, though external guides are still recommended for heavy lateral loads.
Quick checklist
The rear adjuster screw lets you shorten the 160 mm nominal stroke by up to 40 mm, providing a usable travel window of 120 to 160 mm. It functions as a travel stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.